Curmudgeon / Lead Sled Distortion

Curmudgeon / Lead Sled Distortion

179.00

Please see the pre-order details below.

The Curmudgeon is a Solid State Power Amp (Lead Sled) distortion effect that takes your incoming signal, multiplies it by 1000, and slams it into a simulated power amp. This simulated power amp features two parallel stages that are mixed and loaded down just enough for them to struggle to breathe. This gives you multiple stages of solid state amp coloration and distortion. A simple tone control allows you to let it just enough high frequency to help you cut-through in a dense mix (not that you won’t already have the thickest tone on stage).

***

Gain: Controls the amount of input gain of the pedal.

Level: Controls the output level of the pedal.

Tone: Simple low pass filter much like the tone control on your guitar.

Depth: Controls the amount of low end injected into the distortion stages. Flip the switch down for a brighter tone or flip the switch up for a thicker tone.

Power

Use only 9VDC 2.1mm center negative (boss-style) power adapters. Isolated pedal specific power supplies are highly recommended. Damnation Audio pedals are designed for maximum headroom and ideal performance with a 9V supply. Going above 9VDC will damage your pedal and void any warranties. Damnation Audio pedals do not accept 9V batteries.

Dimensions

Approximately 4 5/8” x 3 5/8” x 2 1/4”

In the interest of continuous improvement, all specifications are subject to change without notice.

Pre-order details:

Due to the interest this little box has generated, I have decided to do a small pre-order. The pedal will look much like the attached photo but since no two etched pedals looks the same there will of course be some slight differences pedal to pedal.

The lead time from the close of pre-orders will be roughly 4-6 weeks (depending on the availability of the etched enclosures). I will open up orders for 10 days and close them on 2/28/19.

Add To Cart